 |  |
| Start of the 4Ga Power Cable | Power wire with fuse installed |
 |  |
| Cable going through an existing firewall grommet | Otherside of the firewall into the car |
 |  |
| Going into the trunk under the back seat | Everything but driver door panel off |
 |  |
| Here are the rear amps located behind back seat | Rear amp and front amp removed |
 |  |
| Rear Amps Removed | New RCA Cables for new amps |
 |  |
| RCA Cables at the headunit | RCA,Changer and Front Speaker wires |
 |  |
| Passenger Side Doorpanel with speakers removed | Factory speaker was a 5x7. Alpines are 6.5 |
 |  |
| Passenger side speaker wires | Passenger wires ran to Crossover location |
 | |
| Factory 5.25 rear speaker | |
